Colt series 80 firing pin safety: PTFE Spacer - plate for removing the firing pin safety

-> Fill the empty space when the firing pin safety is removed!

NEW!

--> Made from PTFE: less friction, resistant to oil and solvents!

Tip: be sure to install a reinforced firing pin spring after removing the fuse!

GOLDEN TOOL -> the best protection against scratches on the frame :o)

-> reliably prevents a scratch from being left in the frame when the slide is installed using the slide stop lever.

These "idiotic" scratches (see image) are still a nuisance for many 1911 shooters, because no matter how careful you are ...

that's how it works:

Hook the Golden Tool into the ejector button before Disassembly / assembly and the sledge tag can no longer scratch the frame! Very easy and safe ...

the "golden tool" is cut out of oil and solvent-resistant plastic and actually has an unlimited shelf life!

--> A "must have" for every 1911 owner...

NEW: the tool is now also available in black!

Sear and hammer pins: for easy control of hammer and sear!

Finally, you can control the latches outside of your 1911s: simply insert check pins and hammer and sear are in the same interaction as seen inside the frame!

- easy handling

- always a quick check

- essential for troubleshooting

- for maintenance, repair and tuning!

-> These Trigger check pins should have every 1911 owner!

Scope of delivery set *:

2er test pins for the hammer and the sear
2 O-rings for fixing the pins in the gun frame

* The pictured hammer and sear is not included!

-> fits Colt 1911 Government, Commander & Officer
(only conditionally usable for Colt 2011)

The block made of ultra-hard plastic will help you avoid damage to your weapons!

Essential for removing and inserting pins, bolts or screws!

- The outer rubber cover prevents the block from slipping on a surface when driving pins.

- Inside the block is a magnet that detects fallen pins.

Guide groove for round workpieces e.g. run

- Below is a bushing key (barrel bushing Wrench) for your 1911er!

Gorilla Grip "big" inch / inch Allen key set for all US screw!

the Gorilla Grip Allen set for all reloaders:

5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 "


this Allen set should in any toolbox are missing, because the metric Allen keys nowhere near fit and damage the customs screws immediately!

The practical set 9s, with the most important variables in a key!

Ideal for:

Reloaders (dies, pressing, etc.)

Glands of riflescopes

Grips & Sights

but also to US motorcycles etc.

COLT LOGO Screws for grips, hex 5/64", nickel

with 5/64" allen wrench!

4 Pieces

not for Para-Ordnance!

Bolt for ejector (ejector pin), hollow pin, stainless

* Also used as a retaining bolts for the Colt Gold Cup with Elliason sight!

 

matching pin punch: 1.5 mm

Bolt for ejector (ejector pin), hollow pin, blue

* Also used as a retaining bolts for the Colt Gold Cup with Elliason sight!

 

matching pin punch: 1.5 mm

4 x Screws and 4 x Bushing in a Set, hex 3/32", blue

incl. hex 3/32" wrench

not for Para-Ordnance!

4 x Screws and 4 x Bushing in a Set, hex 3/32", stainless

incl. hex 3/32" wrench

Fig. Shows blued version!

not for Para-Ordnance!