BEEMAN Sportsman Ultra Match Hollow Point Diabolo

with friction-optimized, barrel-friendly coating!

caliber: 4.5 mm, .177"

piece in a pack: 500

Weight/piece: 0,56 g

--> however unsuitable for bear hunting ;o)

Match trigger rings for air rifles/pistols, small rifles and sports pistols

the tactile marker on the trigger shoe for even, precise triggering

--> Function: most match triggers can be moved forward/back, left/right, up/down the finger
has to find the height on the trigger shoe again with every shot! The trigger rings give a tactile
Threshold downwards (or upwards if necessary) for the finger.

Inserting your finger too low/high on the trigger shoe changes the force required for the actual release
of the shot is required (the leverage changes compared to the trigger mechanism). This can be high/low
cause shots or an earlier/later release with the corresponding effects on the hit situation (This is
particularly noticeable with air pistols!). When hunting for every 1/10 ring, absolutely consistent
triggering is essential!

Only a little pressure on the finger, but it always feels like the right position and therefore no different
trigger pressure!

For smoother and better release!

Trigger ring set in a pack of 6, with two sizes and in three colors:

           -quiet blue-, -shiny pink- and -bright orange-

- the rings hold easily on most trigger shoes

- in two sizes, so they always fit and there is no slipping of the rings

- for air rifles (e.g. Walther, Feinwerkbau FWB, Pardini, Anschütz and many more)

- for air pistols (e.g. Walther, Feinwerkbau FWB, Hämmerli, Steyr, Pardini, Anschütz and many more)

- for small caliber KK rifles (e.g. Walther, Feinwerkbau FWB, Hämmerli, Steyr, Anschütz and many more)

- for sports pistols (e.g. Pardini, Morini, Hämmerli and many more)

- for free pistols (e.g. Walther, Pardini, Pfuf, Totz, Morini, Hämmerli and many more)

- also for a few GK pistols (e.g. Pardini GT and many more)

Silicone special grease, NEUTRAL GREASE for rubber, painted & non-ferrous metal parts!

ideal for rubber seals e.g. seals on compressed air filling adapters, loading slides, running beds, sights, etc.

- good adhesion

- low consumption

- Temperature range from -30°C to +180°C

- Neutral to rubber, plastic, paint, wood and bluing

Tube with 3g content

Cleaning utensils on high-strength plastic, cleans in all corners and edges without scratching!

Ideal for all hard-to-reach places on all weapons ...

Set of 4 with 8 different forms

universal ammunition box for transporting ammunition (legally compliant transport to the shooting range!)

with securely locking hinged lid and small padlock, in accordance with the law Requirements!

Individually adjustable with three-fold foam divider!

External dimensions: 125 x 110 x 70 mm

and inside: 110 x 78 x 64 mm

for 2 x 50 shots 9 para, 4 x 50 shots .22, 1 x 50 shots .357
and many long rifle calibers (.44 Mag and .45 ACP boxes may be too long!)

* the ammunition is for decoration only!

Bore cleaning cord for quick and gentle cleaning

Suitable for caliber: 9 Luger, .38/.357 and similar calibers

for handguns with barrel lengths up to 50 cm

TUNGSTEN* Recoil weight set AD25 for PARDINI SP/HP/RF sport pistols - pack of 2!

- compatible** TUNGSTEN (WOLFRAM) weight set to replace the standard steel weights!

- increases the barrel weight by approx. 75 g (when all 6 weights are installed)!

- thus 100% more mass for the PARDINI recoil absorption system!

- with PTFE guide discs for reduced wear!

- the photos show the pack of 6, scope of delivery here as AD25 = 2 pieces!!

- suitable for: PARDINI SP .22 lfb, PARDINI HP .32 S&W (for newer model with 6 weights, from about Bj 2000)

- the set can only be partially installed (2, 4 or all 6 weights) to get used to it!

- also available as a set of 6 (AD75)!

- incl. assembly instructions in D

*Tungsten with a density of 19.2 g/cm³ is significantly heavier than steel with 7.80 g/cm³.
   Even lead is quite "light" at 11.3 g/cm³; Gold is also an option with 19.3 g/cm³ (24K),
   a gold weight would cost about 700,- €, without significant additional weight :o)

**compatible, not an original PARDINI product (replaces PARDINI No.: 704/1/NT and 704/1/N)!

Rifle and pistol rest block for zeroing hunting and sporting weapons

- Solid and robust support block with different support heights

- including mesh bag

- Dimensions: approx. 22x17x8 cm

Gasket: "compressed air cartridge" for HÄMMERLI air pistols, 3 pieces in GREEN

--> these seals age and should therefore be changed regularly!
--> use silicone grease to care for the seals!

The set includes the following three seals:

3 pc. green O-ring for filler on pressure bottle (large)
(Hämmerli 2745022, 1.701.410)

fit for the Hämmerli LP (air pistol) models:

AP40, AR30, AR50 and the converted ones 480, 480K, K2

electronic hearing protection "WALKER RAZOR" with flat earpieces + BOX

--> amplifies conversations/noises, but suppresses the shot channel!

- simple operation with just one rotary control (ON + volume)

- light weight about 450g

- Noise reduction of 23 dB NRR

- quick response of 0.02 sec.

- padded headband

- incl. 2 x AAA batteries

- incl. 3.5 mm cable for radio/MP3 player

- Colour: light olive

- 2 x USA patches (with Velcro, removable/replaceable)

- Zipped hard shell BOX